< back

Site To Plot

Image title

The Site To Plot section allows you to select a predefined radio system if you wish. There are some predefined radio systems automaticaly available in TowerCoverage.com or you can create your own custom Radio Systems. Instructions for creating custom Radio Systems willcan be coveredfound in the Radio System Section below.section. By selecting a Radio System TowerCoverage.com autofills some or all of the information for the other sections on this page. Required fields of this section include naming the coverage map you are creating, selecting the tower site that this equipment is located on, as well as entering the height of the mounted equipment.

Image title

New Map Name: You can name the coverage map whatever you want, however, we recommend you use: tower/site name–antenna–directional degree of the antenna. For example: For a coverage map of a 2.4 Ghz Sector on Pinoak Tower set at due south the name will be “pinoaktower-sector24-180”. For your information, due north is 0 degrees, due east is 90 degrees, due south is 180 degrees and due west is 270 degrees.

Tower Site: Select one of the Tower Sites you set up already from the drop down menu.

Antenna Height: By default, when you select the site, TowerCoverage.com will automatically pull the height from that site’s properites. Once you have selected the proper tower site name, you can manually adjust the antenna height for this specfic coverage map. If you enter the height in feet TowerCoverage.com will automatically convert it to meters for you.