Change Log

Changes v.3.25 3/18/2020

System Update

• TowerCoverage has been updated to send an automatic email notification when an account holders API count gets closer to its monthly limit.
• Notifications are set to occur when the account reaches 80% 90% 95% and 100%
• Notifications will be sent to the registered email address for the master account holder.

Changes v.3.24 3/17/2020

Feature Update

• Added Customer Notification Section under My Account -> EUS Settings
• This allows towercoverage.com to notify the customer when they submit a EUS.
• Added Rain-fade Availability calculation to TowerCoverage.com Links
• This calculates rain loss based on Polization and Rain Zone selected. Then based on the RX Sensitivity calculates the availability, i.e. Five 9s down to 2 9s.

Changes v.3.23.37 2/24/2020

System Update

• USGS Landcover for the lower 48 has been updated to 2016 data.

Changes v.3.23.36 11/14/2019

Feature Update

• Changed the EUS IFrame Integration so that users can either drag the pin or click on the map to select their exact location.

Changes v.3.23.35 11/5/2019

Improvement

• Optimized the Tower site data on Multi-Coverages with display pins turned on, resulting in an average of 380 percent faster load time.

Changes v.3.23.34 11/4/2019

Bug Fix

• The distance discrepancy between TowerCoverage and Google Maps has been corrected.

Changes v.3.23.33 10/25/2019

Feature Update

• The EUS Data Details Message has been modified to Clarify whether a submission is a no service submission or if it has not completed processing.

Changes v.3.23.32 9/30/2019

Feature Update

• The Meter and Feet Fields on Coverage Creation have been positioned on different lines for better usability.

Changes v.3.24.31 9/25/2019

Feature Update - EUS Data Date sorting

• We have added an additional option to the top of the EUS Data list. This option changes the default date display between the Created Date and the Last Updated date. This option is user specific which allows each user of your account to choose which date is displayed. For both date types you can hover over the currently viewed date to see the other date. Example: If you have the created date selected, the hover action on the date will display the created date and if you have the updated date option selected, the created date will display when you hover over the current date value.

Changes v.3.23.30 9/13/2019

Bug Fix - Save Sites during Path Analysis

• Corrected the issue with saving sites during a single Coverage Path Analysis. The site will now show up in the sites list to be edited or delete.

Changes v.3.23.29 9/12/2019

General Update - EUS Results Print

• Added a button to the EUS Details page that allow you to print the current EUS Data details.

Changes v.3.23.28 9/11/2019

General Update - Path Analysis Zoom Controls

• Changed map default to a hybrid map instead of the terrain map.

Changes v.3.23.27 9/11/2019

Bug Fix - Path Analysis Zoom Controls

• Changed the position of the zoom controls on a path analysis. Original position became obscured with the introduction of the live chat feature.

Changes v.3.23.26 8/26/2019

Feature Update - Coverages

• Users now have the option to delete by group. These groups are assigned by the group field during tower creation. Any coverage associated with that tower that are not included in a multi-coverage will be deleted.

Changes v.3.23.25 8/19/2019

Feature Update - Fiber Coverages

Users can now add individual paths or offshoots to a fiber coverage. In addition to that users can:

• specify the color of each individual path
• add the number of strands as well as specify the mode and type for
• each individual path.
• give each path a name.
• specify the distance for each path.
• put an entire network into one fiber coverage.

Changes v.3.23.24 8/9/2019

Feature Update

• EUS data sorts by updated date, but if you hover over it you can see the date of submission.

Changes v.3.23.23 8/6/2019

Feature Update

• You can now download Shapefiles from your Multi-Coverage in ESRI format via the new orders page.

Changes v.3.23.22 7/26/2019

Bug Fix

• When searching for an address and adding a new site, the pin will now utilize your selected custom pin instead of the default option.

Changes v.3.23.21 7/25/2019

Feature Update

• Added a "Download Sites List CSV" button to the site list page.

Changes v.3.23.20 7/25/2019

New Feature - Contained EUS Reprocess

• Returns all EUS data within the target area. This area is defined by your BeamWidth Filter settings and the Max Distance of your coverage.
• You can adjust you're results by using the check boxes to toggle pins on and off.
• If the coverage is included in one or more Multi-Maps, You can select from the drop-down which Multi-Map you'd like to pull the data from.
• You can preview a user's signal strength by clicking on a pin.
• Results are subject to change if you make adjustments to the Azimuth, BeamWidth or Max-Distance.
• There is also an option to download a CSV file of the users contained within your coverage area.
• Reprocessed End Users will be shifted to the top of your EUS data list.
• Users can elect to send associated emails to their EUS mailing list, and re-push the data into their billing system

Changes v.3.22.20 7/12/2019

Feature Update

• On your site map view, you can now see all coverages assigned to that tower site when you click the pin.

Changes v.3.22.19 7/11/2019

Feature Update

• When performing a Path Analysis on a Coverage, results now include loss calculations. Calculations include Forest Loss, Statistical Loss, Urban Loss and Worst Fresnel

Changes v.3.22.18 6/27/2019

Feature Update

• You can now make adjustments to the BeamWidth filter as well as the range and the azimuth heading of your coverages by dragging the pins on the map.
• It also allows you to view the area that EUS submissions on a path analysis will be accepted.

Changes v.3.22.17 6/21/2019

Feature Update

The Fiber Coverage feature has been modified in the following ways:

Changes to the Interface

Coverages now display:

• The length of the Fiber/Cable Coverage in Kilometers and Miles
• The coverage area in Square Kilometers / Miles based on distance allowed
• The current number of coverages being used

Changes to Functionality

• Users can now create a continuous line of multiple coverages in one map.
• Users can delete pin points from their map by double clicking the pin.

Changes v.3.22.16 5/22/2019

Feature Update

• Added fiber coverage names to EUS Emails if customer EUS Data falls inside a fiber polygon.

Changes v.3.22.15 5/14/2019

Bug Fix

• The Path Analysis was sorting the data by closest tower location. This has been corrected to sort by signal service up to the maximum distance, and by quality.

Changes v.3.22.14 5/9/2019

Feature Update

• The weather radar button has been removed from the multi map due to lack of use, and the shutdown of our original data source.

Changes v.3.22.13 5/8/2019

Feature Update

• A new API has been added to retrieve LandCover Type IDs when you use the Add or Edit Coverage API.

Changes v.3.22.12 5/7/2019

Bug Fix

• The Devices feature was not showing up on a Multi Map due to a Google API change. We have updated our API and everything is working as intended.

Changes v.3.22.11 5/6/2019

Feature Update

• The North America public map has been updated so that when you click on a pin the merged view will hide, and only the coverages associated with that WISP will display.

Changes v.3.22.10 5/3/2019

Feature Update

• The Marketing Address feature has been updated to only count rows that have complete physical addresses. (Address Number, Street Name, City, and Zip Code)

Changes v.3.22.9 5/1/2019

Bug Fix

• When you successfully create or update a coverage through the coverage API, it will give a working image path so you can see what the coverage looks like.

Changes v.3.22.8 5/1/2019

Bug Fix

• Multi Map reprocess on coverage update has been fixed to wait until the coverage is done processing.

Changes v.3.22.7 4/19/2019

Account Update

• Accounts can now have up to 5 Admin Accounts and the Master Account (creator of the account) can modify and delete other admin accounts.

Changes v3.22.6 4/13/2019

Feature Update - Multi Map Duplicate

• The Multi Map has been updated so that the map displaying blank on a duplicate map has been corrected, and will use the initial map's center point and zoom level to create the new map.

Changes v3.22.5 4/12/2019

Feature Update - Multi Map Path Analysis

• The Multi Map Path Analysis will now function the same as the single Coverage Path Analysis for LTE Coverages. The selected location will provide up to 6 possible links if the location falls within the Beam Width Filter and the max distance. As you click through the given results, all Coverages that are marked as being LTE Coverages will use the channel width and the projected signal to calculate what you would expect to see in your CPE for signal (RSRP).

Changes v3.22.4 3/12/2019

Feature Update

• The Website integration has been updated. Multi Maps that are used on your website for map display purposes (i.e. Data Collection Form is off) will use the user defined zoom level as well as the user defined center point of the map. You can see what your map is set to by opening the map that is linked to your website. To update the center, you can click the map to drop the green pin and select "Set Center" in the lower toolbar menu. adjusting the zoom slider in the bottom toolbar will automatically set the zoom level for your map as well.

Changes v3.22.3 2/18/2019

Feature Update

• Updated the Credit Card Processing page so that any error or alert will appear in bold red text with a more visible alert box area to notify the user of any problems during the processing of a subscription payment.
• Updated the API Counter to reflect the use of the Edit/Create Site API
• Add Edit/Create Sites API and Other API counter to the Account >> API page.

Changes v3.22.2 2/15/2019

Feature Update

• The Fixed Broadband Deployment Data Order has been updated. The file previously labeled "CensusBlocks.txt" is now "DeploymentData.csv". The file will now download instantly rather than loading for a great length of time and it saves as a CSV file with the Block ID's in column 1 filled out so that you simply need to complete the remaining columns and upload the file to the FCC.

Changes v3.22.1 2/13/2019

New Feature added

• Devices can now be added to Coverages, Fiber Coverages and Multi Maps. You can right click to add many different types of devices as well as view the devices by group or view all of them at the same time.

Feature Update

• The Frequency Coordination feature has been updated to utilize the beam width filter setting.
• Added a border to each sector so that the overlap is noticeable.
• Each sector is now clickable and will tell you what the Exact Center Frequency is.

Changes v3.21.1 1/18/2019

• Added low priority processing for Multi Coverages so that accounts that have less than 15 Multi Coverages in queue will process ahead of a bulk processed Multi Map.
• Updated Coverages so that the Land Cover and Population Images can be turned on and off for faster processing if the map data images are not needed.
• Updated the ASR Data so that all tier accounts have access to the Structure information as well as a link to the FCC Database containing all the data about the location.

Changes v3.20.3 1/14/2019

• Bug fix that prevents editing Coverages if the account Coverage count is at maximum (i.e. 50/50).
• Accounts are now prevented from going over the allowed coverage limit for their tier when using the Coverage Array feature.

Changes v3.20.2 10/16/2018

• removed counting animations from Stats page to speed up loading.
• Updated Bulk Coverage update to show loading gif after accepting the use of API calls.
• Added saving notification when creating a Best Tower submission.
• Updated the LandCover Type dropdown list to show the Standard option available even if the current account does not have any other Land Cover Types available.
• Best Tower results now show in the recent changes.
• Best Tower results now open as full screen rather than in a smaller window inside the EUS Page
• Best Tower results can be opened from the Stats page Recent Changes window.
• Accounts on the old subscription payment process now have an unsubscribe button available that will direct them to PayPal so the recurring payment can be removed.

Changes v3.20.1 9/14/2018

• Drastically increased the resolution that Multi Maps are processed at for improved population estimates and Marketing Address List accuracy.
• Multi Maps and Coverages no longer need to clear browser cache after updating to see the new changes. We have added image versioning to prevent the old image from displaying in your browser.
• Applied Image versioning to the sites server.
• Updated the Coverage Array feature so that it will no longer allow your account to go over the allowed limit.
• Added limit detection to notify the admin of the account if the number of Coverages exceeds the allowed limit.
• Fixed the Bulk Coverage Update so that Land Cover Types are applied accordingly.
• The Email Support feature in the account menu will now add the email to a queue and attempt to send your email to our support staff until it successfully goes through.

Changes v3.19.1 9/13/2018

Account

• The Company profile now has a Google API Key input box. The maps on TowerCoverage.com have been updated. Account levels Tier 4 and up now have the auto complete by default, and Free accounts through Tier 3 can provide their own key to enable the auto complete and street view features of the map.
• The company Latitude and Longitude are now updated on creation of a new account.

Multi Maps / Coverages

• The autocomplete and street view is now disabled by default for Free accounts through Tier 3. It can be enabled by adding a Google Maps API key to the company profile.

Fiber Coverages

• The bug has been corrected that was preventing the Update button from being clicked when editing the map pin locations.

Changes v3.18.1 8/10/2018

Account

• The ability to sign-up,register and upgrade with a credit card is now available.
• If you are currently on the newer PayPal Billing agreement process, you can simply upgrade your account.
• If your account is on the older process and states to remove the subscription from your PayPal Account, you will need to do so before the credit card process will become available.

MultiMaps

• The MultiMap style sheets have been updated so that when opening a map on an iPad, it will display the mobile view.
• The search field has been updated so that it will accept more vague search criteria as well as it will now provide suggestion of what you are looking for based on the area you are currently viewing.
• The search will now also report the business location if the business name is know to Google Maps.

Best Tower Feature

• The feature has been updated to improve the speed at which the maps process.

Integration

• The iframe form has been updated so that the upper fields are clickable on apple devices.

Changes v3.17.2 7/13/2018

Maps

• Updated the Address Search bar in Coverages and Multi Coverages to allow postal code searches, select the type of search, restrict the search to the visible map area, and include address suggestions as you type.

Changes v3.17.1 7/11/2018

Performance

• Updated the site to improve load times and correct an error that was causing the site to timeout.

MultiMap

• Updated the styles so that high resolution screen sizes can use the page in half a screen without compromising the usability.
• Added a new button "Order Files" so that admin users can order any deliverable file from the Multi Map without having to locate the correct map in a drop down list after getting to the orders page.
• After placing a pin on the map by searching and Address/GPS or by clicking on the map, you can now double click the pin to perform a Path Analysis without having to select any additional options.

Coverages

• After placing a pin on the map by searching and Address/GPS or by clicking on the map, you can now double click the pin to perform a Path Analysis without having to select any additional options.
• Added an additional field for setting the Channel width of the Coverage.
• Added an additional field for marking a Coverage as an LTE Coverage.
• Added a dynamic calculation that shows what the RSRP value would be using the channel width and the Rx Threshold.
• The Path Analysis Signal will display in RSRP if the Coverage is an LTE Coverage.

API's

• Added a GETChannelWidth API to retrieve all currently available channel widths to be used in the CoverageAPI.
• Updated the Coverage API so that the Channel Width and LTE value can be set. This is not required and will default to a value of 20Mhz and no accordingly.

Changes v3.16.1 6/15/2018

EUS Iframe

• The Iframe version of the End User Submission system has been updated so that the form fits better into the parent container of your website. It will take on the overall font style of your page. In addition to that, the background has been made transparent so that you can set the background color to fit the color scheme of your site.

Account

• The Account tab Contact Us is now clickable. It will open a window that will provide the phone number as well as a Verification Code to expedite getting assistance when calling support. There has also been a text area added for you to type a message to the TowerCoverage.com Support Team.

Address List Orders

• The address list feature can now be used on a Multi Map that only contains Fiber Coverages.

Changes v3.16 5/18/2018

New Feature

Orders

• In the New Orders window, there is now a product type for ordering the physical address list from your Coverage area. This order allows you to select an existing Multi Coverage and process the number of addresses prior to ordering the list. The cost is determined by how many addresses are available. Once payment is completed, a file is created that contains all available parcel data from the Coverage area.

Feature Updates

The Home screen has been redesigned so that the lower pages are more apparent as well as easier to access via the new selection buttons at the bottom of the screen.

Multi Map

• Added some new styles and font resizing to allow for changing of screen types.

Account

• the Master Account is now visible in the User menu and now has the permissions required to remove other admin users from the account.
• The manage subscription page will now open in a new window rather than inside a box of the current screen.
• The Terms and Policy window will now automatically display if there is any modification to it so that the changes can be agreed upon.

EUS Data

• The EUS Settings window will now refresh after it is updated rather than opening a new window with no styles.

Changes v3.15.2 5/17/2018

Feature Updates

New TowerCoverage.com Support number added to the Accounts Tab.

MultiMap

• The Path Analysis has been updated so that you can either use the Client antenna height of each Coverage for the results, or you can specify a custom installation height.
• New Multi Maps can no longer be created without a Name and at least 1 Coverage include.
• Updated fonts to resize on screen resize.

Coverages

• The path analysis now allows for custom antenna height rather than using the settings of the coverage.
• The Antenna Height and Client Antenna height Meter to Feet converter has been updated to prevent errors and improve ease of use on Editing and creating a new Coverage.
• Save Path Analysis will use the specified custom antenna height when saving a Link to your account.

Sites and Links

• The Default Height Meter to Feet converter has been updated to prevent errors and improve ease of use.

Changes v3.15.1 5/16/2018

Feature Updates

General

• Updated all List windows to open in full screen.
• Drastically improved load times of all list windows.
• View All button added to Coverages and Sites List.
• Lists will initially load 200 results and the view all button will reload with all results included.
• Recent Changes on the Stats Page will now consider Links being updated as a recent change.
• Redesign of New buttons for quicker response times.

Coverages

• Bulk Coverage reprocess updated so that resolution and reliability can be updated.
• Max distance can now be set to 1 km.
• Required Reliability slider moves in 5% increments.

Multi Map

• Bulk Map Delete Added.
• Added Search bar to Included Coverages in the Edit Coverages window.
• Search by name added to Multi Map List.
• Added row highlighters to the Coverage Update window so that pending changes are view able.
• Small screen resolution styles added.
• Added ability to sort all columns in the Coverage Update window.

Links

• Added small screen resolution styles.

Sites List

• Added "Edit Site" button.
• All sites can be edited from the list view automatically without redirecting back to the Stats window.
• Added "Map View" button.
• The map view will display all of your Tower locations on a Google Map. It will also allow you to click on a pin and see the current settings, or go to the edit page of the Tower Site.

Changes v3.15 5/14/2018

New Feature

Plot 360 Coverages

• On the Coverage creation page, there is a new option in the lower right for Plot Coverage Array. This feature allows you to define the number of sectors, the Advertised sector Beam Width and if you wish to have them evenly spaced apart or side by side.
• Example: If you select 90° sectors, set the Number of Coverages to 2, the Transmitter Settings Azimuth is at 0, and turn Evenly Spaced on, you will have 2 90° Coverages. One will be named "Your Coverage Name 0 Degree" and the other will be "Your Coverage Name 180 Degree".
• (Note: These settings are used to determine spacing and have no effect on individual Coverage propagation or EUS/Path Analysis results)

Feature Updates

Coverage Duplicate New Azimuth

• You can now set the azimuth of the new Coverage before processing to avoid having to process twice.
• Plot to 360 on Duplicate
• Also when duplicating, you can use the current Coverage to complete a 360 array of Coverages. This will use the current settings and create as many Coverages as needed to complete the full circle of propagation around the Site.
• Manage Subscription
• The Manage Subscription page has been updated to prevent more than one instance from being displayed if you click an unavailable feature multiple times.

Multi Map Updates

• You no longer have to reprocess your Multi map to change the settings. Only adding and removing Coverages requires the map to be reprocessed. All other settings update the moment you change them with no further action required.
• The option windows and settings have been completely resigned for ease of use.
• Load times have been drastically improved.

Changes v3.14.1 1/17/2018

Updates

• Added Map Type Selector, Address Search, Custom Zoom buttons to Fiber/Cable Coverages.
• Added View EUS Data/ASR Data ability to Fiber/Cable Coverages.
• Set default values on Fiber/Cable Coverages.
• Correct the issue with the EUS data Advanced Search not returning values.
• Set Default Zoom Level to a more reasonable value when creating a new Multi Map.
• Updated the Multi Map Duplicate feature to update correctly when no Fiber/Cable Coverages are included.
• Updated EUS Data and Coverages Link Path messages to be more descriptive when the point does not return any link results.
• Added a "Notes" section to Fiber/Cable Coverages.
• New Fiber/Cable Coverages will now start with the map at the location in you Company Profile. (Note: To activate this feature you will need to open the Company Profile and click "Update". Upon doing so, if your business address can be geocoded, The "New Sites" and "New Link" maps will start at your business location by default.)

Changes v3.14 1/15/2018

New Feature

• Fiber Coverages have been added as a Coverage Type.
• You can now add up to 25 Point or a 70 Km Multi-Point Line to a dynamic map as Coverage. You can also specify the distance, Strand Count, Transport Type, Mode and Color in which you would like to display a polygon away from the Multi-Point line.
• Fiber/Cable Coverage Color selection will default when Added to Multi Coverages.
• Upon creating the Fiber/Cable Coverage, the completed Polygon of your Fiber/Cable Coverage will be displayed.
• Editing the Fiber/Cable Coverages allows you to change all the values.
• You may also select between editing the path your Fiber/Cable Coverage takes or Adding Points to the Path. (NOTE: only one of these options can be changed at a time but will update and reload immediately after you click "UPDATE", allowing you to also Update the other as well.)

Updates

• Added Fiber Options to Layouts, located under the current Coverages Selection
• When deleting Multi Coverages, the notification will now let you know which Multi Coverages are included, so that you can locate it easier.
• Bulk deleting Fiber Coverages will automatically remove them from any Multi Coverage they are included in.
• All features now appear to all accounts, but users will receive a notice if it is not available to the currently subscribed tier.
• Added 'Set Map Center' to Multi Coverages.
• This feature allows you to select a point on the map by clicking to drop a pin. The map will automatically update and open with the pin location as the center until changed.
• Account Profile based Map centering.
• To activate this feature you will need to open the Company Profile and click "Update". Upon doing so, if your business address can be geocoded, The 'New Sites' and 'New Link' maps will start at your business location by default.
• Corrected the 'EUS API Settings' page to display correctly without displaying a generic page.
• The Manage Subscription page will now open inside any window you are currently viewing. You can also close it without loosing your place on the current task.
• Task but widget has been relocated to the top right of the dashboard and replaced with the FCC Form 477 countdown timer. this Clock will reset after the due date and start counting down to the next due date.
• EUS Data as well as the Emails that you receive will now display if the given location is located in a Fiber/Cable Polygon.
• Multi Map Path Analysis will now display if the given location is located in a Fiber/Cable Polygon.
• Added Bulk Delete Feature to the Multi Map List.
• Corrected the issue with Antenna Patterns that are uploaded displaying as omni directional antennas.

Changes v3.13.1 10/06/2017

Updates

• All maps have been updated to not require you to hold Ctrl when attempting to zoom in and out.
• Corrected resizing issues with the widgets and buttons on the Stats page.

Changes v3.13 10/06/2017

Updates

You will possibly need to clear you cache and cookies due to many style changes in this update

• Updated Payment Details to show a more complete invoice.
• Removed the Ctrl requirement from MultiMaps when trying to zoom in and out.
• Removed News Feed from the Stats window.
• Removed the large Clock from the stats Page and put buttons for Feature Requests, News, and the Change Log in the tile.
• Increased the size of the Recent Changes tile.
• Added Non-Updated EUS Data tile to the Stats page.
• You can now add Custom Pins to your account. This can be located in Account >> EUS Settings.
• Select from one of the new icons
• Give it any name you wish to use.
• It will then become available to assign to EUS data when Updating an entry.

Changes v3.12 8/31/2017

Updates

• Corrected text Contrast on the OFF/CHANGE button of the bulk Coverage reprocess page.
• From an existing Coverage, there is now a Radio icon on the top of the edit panel. By clicking this, you can create a New Radio System using the values of the current Coverage.
• Input/Read-Only Accounts can now update their own Password, Start Page and Name.
• All GET API's will now return 'Last Updated' in the response XML.
• All maps have now been set to open in Hybrid view rather than Road map view.
• Updated the registration page to a more user friendly Captcha.
• All accounts can now create multiple Land Cover versions. Each Coverage or Link can use different Land Cover settings.
• Bug reports are now an available type in the Feature Requests page.
• Updated the Multi Map and Coverage Map so that the Address search toolbar does not hide when the Edit panel is hidden.

Changes v3.11.1 8/10/2017

Bug Fixes

• Corrected Visual error on Manage Subscription page where if subscribed you could not see the list of features by tier table.
• Correct the tutorial window. It now properly calls the correct domain.
• Added Approval pending to the Feature Request page. If you submit a request, it will display Pending Approval until Verified by an Admin of TowerCoverage.com.
• Updated the "I want This!" column. When a feature is completed the plus button will be removed and a check mark displaying completed will appear.
• Corrected Edit Site page not displaying the pin if the site was created prior to v3 release.
• Improved the 'Brought to you by Link Technologies Inc' link on the Stats page.
• Corrected intermittent issue with Tutorial window not being movable on some pages.
• Corrected visual errors on Edit Coverages/MultiCoverage/Links pages, Delete and Duplicate buttons were displaying incorrectly.
• Updated the New links page to recenter the Map when changing the Site locations.

Changes v3.11 7/24/2017

New Features

• When creating a new link, you can now see a map view that auto detects your location to set the map center.
• When you select 2 Site locations in a New Link, it will show you pins on the map at the location of the 2 sites and draw a line between them.
• If you have greater than 500 Sites, Coverages, Links or Multi Maps, it will load only the 500 most recently updated and display a button to click at the bottom of the window if you would like to display them all.
• Improved usability and flow of the Home page "Find A Provider* feature.
• Added a button in the top right of the Stats page. The button takes you to a page to request new features or even let us know if you like a feature that someone else already suggested.

Updates and Bug Fixes

• When duplicating Multi Coverages and Coverages, the new map being processed will now appear in the Recent Changes Widget on your Stats page.
• Corrected an issue with not being able to see or Print all Payments if using the new billing system.
• Added scroll ability to KML Overlays window.
• Added Scroll to +ADD window in Multi Coverages.
• Corrected the Pins when viewing Link Groups to allow them to be clicked to view the Link Analysis rather than only being able to click the small line between the points.
• Corrected the view of all side bar lists to display correctly.
• The height in the left side table will now update if you enter the Antenna Height for AP or the Client Average in feet.
• Terms of use page can now be clearly viewed.
• The find a Provider display has been corrected to not display the tool bar from the Dashboard.
• Find a Provider will now open in a new page rather than in a lightbox.
• Corrected the Coverage List not loading properly after a Path Analysis that contains no results.
• On EUS Data Details, the pin type will automatically save when you change it. Clicking update is no longer needed.
• Added Labels to Captcha Field.
• When attempting to Delete a Site, you will be notified if the Site is being used by a Coverage or Link.
• Corrected the API Template Generator to copy code correctly and automatically apply your account ID and Key to the code.
• Corrected the Template generator to work properly in FireFox.
• Find a provider Captcha changed to reCaptcha.